Recent articles (showing 51-60 out of 69):

WARNING: This post has been marked as obsolete and may be incorrect. It is kept for archival purposes only. The default console in FreeBSD is 80 x 25 geometry in whatever default resolution it can choose... but sometimes you want more.

So here's how to set a new resolution...

First, you need to load the VESA driver into the kernel (if it's not already loaded) – ignore any errors...

kldload vesa Copy

Next, you need to query the console to find out what modes are available, to do this type (as root):

vidcontrol -i mode < /dev/console Copy

This will output all the available modes for your card+monitor.  An example of one of the lines on my card is as follows:

280 (0x118) 0x0000001f G 1024x768x32 D   8×16  0xa0000 64k 64k 0xf3000000 3072k Copy

(mode 280 is 1024 x 768 in 32-bit colour and uses a 8×16 font)

This is the mode I want to use, and I want to increase my geometry from 80×25 to 132×60, so I can type the following command to one-time set it:

vidcontrol -g 132×60 MODE_280 < /dev/console Copy

If you want to use this as the default every boot, add the following line to your /etc/rc.conf file:

allscreens_flags="-g 132×60 MODE_280" Copy

And also load the VESA driver on boot, by adding the following line to your /boot/loader.conf file:

vesa_load="YES" Copy

That's all there is to it.